Deskset Name; Hold Reminder - AT&T SynJ SB67148 User Manual

Deskset settings
Deskset setup

Deskset name

Use this feature to change the deskset name.
1. When the deskset is not in use, press the Menu softkey.
DIR or
2. Press
the Select softkey.
3. Press DIR or
the Select softkey.
4. Use the dialing keys (page 40) to enter a name.
• Press move the cursor to the left or
• Press X/DELETE to erase a character.
• Press and hold X/DELETE to erase all characters.
5. Press the Save softkey to confirm and return to the previous menu. There
is a confirmation tone.

Hold reminder

When there is a call on hold for more than three minutes, the deskset gives
you a reminder beep once every 30 seconds. You can also turn this setting off.
1. When the deskset is not in use, press the Menu softkey.
DIR or
2. Press
the Select softkey.
3. Press DIR or
the Select softkey.
4. Press DIR or
Press the Save softkey to save the setting and return to
5.
the previous menu. There is a confirmation tone.
NOTE: A call on hold after 10 minutes is automatically forwarded to
the auto attendant, even if the auto attendant is not activated. To
keep a call on hold longer than 10 minutes, release the held call within 10 minutes and
then place the call on hold again.
CID to scroll to Deskset setup. Press
CID to scroll to Deskset name. Press
CID to scroll to Deskset setup. Press
CID to scroll to Hold Reminder. Press
CID to scroll to On or Off.
to the right.
17
L1
Call log
Ringer setting
Mailbox setup
>Deskset setup
Back Select
L1
Key tone
Language
Line selection
>Deskset name
Select
Back
L1
Enter name:
Deskset 1
Back Save
L1
Call log
Ringer setting
Mailbox setup
>Deskset setup
Back Select
L1
Language
Line selection
Deskset name
>Hold Reminder
Back Select
L1
Hold Reminder:
:On
Save
Back