Diagnostics - Motorola 2200 Administrator's Handbook

Link:

Diagnostics

The diagnostics section tests a number of different things at the same time, including the DSL line, the
Ethernet interface and the PPPoE session.
==== Checking LAN Interfaces
Check Ethernet LAN connect
Check IP connect to Ethernet (LAN)
Pinging Gateway
Check MAC-Bridge connect to Ethernet
==== Checking DSL (WAN) Interfaces
Check DSL Synchronization
Check ATM Cell-Delineation
ATM OAM Segment Ping through
*** Don't worry, your service provider may not support this test
ATM OAM End-To-End Ping through
*** Don't worry, your service provider may not support this test
Check Ethernet connect to AAL5
Check PPPOE connect to Ethernet (vcc1)
Check PPP connect to PPPOE (vcc1)
Check IP connect to PPP (vcc1)
Pinging Gateway
==== Checking Miscellaneous
Check DNS- Query for netopia.com
Ping DNS Server Primary IP Address
TEST DONE
The following table summarizes the possible results.
CODE
PASS The test was successful.
FAIL The test was unsuccessful.
SKIPPED The test was skipped because a test on which it depended failed, or it was not sup-
ported by the service provider equipment to which it is connected, or it does not
apply.
PENDING The test timed out without producing a result. Try running the test again.
WARNING The test was unsuccessful. The Service Provider equipment your Gateway connects to
may not support this test.
(LAN)
(vcc1)
(vcc1)
(vcc1)
Description
: PASS
: PASS
: PASS
: PASS
: PASS
: PASS
: WARNING
: WARNING
: PASS
: PASS
: PASS
: PASS
: PASS
: SKIPPED
: SKIPPED
217