Internal Servers - Motorola 2200 Administrator's Handbook

Link:

Internal Servers

Your Gateway ships with an embedded Web server and support for a Telnet session, to allow ease of use
for configuration and maintenance. The default ports of 80 for HTTP and 23 for Telnet may be reassigned.
This is necessary if a pinhole is created to support applications using port 80 or 23. See "Pinholes" on
page 82. for more information on Pinhole configuration.
Web (HTTP) Server Port: To reassign the port number used to access the Motorola Netopia® embedded
Web server, change this value to a value greater than 1024. When you next access the embedded Motorola
Netopia® Web server, append the IP address with <port number>, (e.g. Point your browser to http://
210.219.41.20:8080).
Telnet Server Port: To reassign the port number used to access your Motorola Netopia® embedded Telnet
server, change this value to a value greater than 1024. When you next access the Motorola Netopia®
embedded Telnet server, append the IP address with <port number>, (e.g. telnet 210.219.41.20 2323).
You can also use the LAN-side address of the Gateway, 192.168.1.x:8100 to access the web server and
192.168.1.x:2323 to access the telnet server. The value of 0 for an internal server port will disable that
server. You can disable Telnet or Web, but not both. If you disabled both ports, you would not be able to
reconfigure the unit without pressing the reset button.
129