Filter basics
In the source or destination IP address fields, the IP address that is entered must be the network address
of the subnet. A host address can be entered, but the applied subnet mask must be 32 bits
(255.255.255.255).
Netopia Embedded Software Version 7.7.4 has the ability to compare source and destination TCP or UDP
ports. These options are as follows:
No Compare
Not Equal To
Less Than
Less Than or Equal
Equal
Greater Than or Equal
Greater Than
Example network
Input Packet
Example filters
Example 1
Filter Rule:
Incoming packet has the source address of 200.1.1.28
Item
Does not compare TCP or UDP port
Matches any port other than what is defined
Anything less than the port defined
Any port less than or equal to the port defined
Matches only the port defined
Matches the port or any port greater
Matches anything greater than the port defined
Filter
Internet
Data
200.1.1.0
255.255.255.128
Forward = No
What it means
IP 200.1.1.??
(Source IP Network Address)
(Source IP Mask)
(What happens on match)
161