Log Event Messages - Motorola 2200 Administrator's Handbook

Administrator's Handbook

Log Event Messages

1. administrative
access attempted:
2. administrative
access authenticated
and allowed:
3. administrative
access allowed:
4. administrative
access denied -
invalid user name:
5. administrative
access denied -
invalid password:
6. administrative
access denied - telnet
access not allowed:
7. administrative
access denied - web
access not allowed:
1. Received NTP Date
and Time:
2. EN: IP up:
3. WAN: Ethernet
WAN1 activated at
100000 Kbps:
4. Device Restarted:
1. WAN: Data link
activated at <Rate>
Kbps (rx/tx)
2.WAN: Data link
deactivated
3. RFC1483 up
4. RFC1483-<WAN-
instance>: IP down
126
Administration Related Log Messages
This log-message is generated whenever the user attempts to access
the router's management interface.
This log-message is generated whenever the user attempts to access
the router's management interface and is successfully authenticated
and allowed access to the management interface.
If for some reason, a customer does not want password protection for
the management interface, this log-message is generated whenever
any user attempts to access the router's management interface and is
allowed access to the management interface.
This log-message is generated whenever the user tries to access the
router's management interface and authentication fails due to incor-
rect user-name.
This log-message is generated whenever the user tries to access the
router's management interface and authentication fails due to incor-
rect password.
This log-message is generated whenever the user tries to access the
router's Telnet management interface from a Public interface and is
not permitted since Remote Management is disabled.
This log-message is generated whenever the user tries to access the
router's HTTP management interface from a Public interface and is
not permitted since Remote Management is disabled.
System Log Messages
This log-message is generated whenever NTP receives Date and
time from the server.
This log-message is generated whenever Ethernet WAN comes up.
This log-message is generated when the Ethernet WAN Link is up.
This log-message is generated when the router has been restarted.
DSL Log Messages (most common):
This log message is generated when the DSL link comes up.
This log message is generated when the DSL link goes down.
This log message is generated when RFC1483 link comes up.
This log message is generated when RFC1483 link goes down.