Remote Access Code - VTech 15850 User Manual

3. Press
SELECT.
4. Press
SELECT.
5. Press
SELECT
6. Press
conirmation tone.

REMOTE ACCEss CODE

A two-digit security code is required to access the
answering system remotely from any touch-tone
telephone. The preset code is 19. You can set the code
from 00 to 99.
To change the remote access code:
MENU
1. Press
. Press
SELECT.
3. Press
SELECT.
4. Press
SELECT.
5. Use the dialing keys to enter a two-digit number.
SAVE
6. Press
Note: Remote access can only be used if this function
is activated.
to highlight Ans sys setup, then press
or
to highlight # of rings, then press
or
to highlight 6, 5, 4, 3, 2, or Time savor.
or
to conirm your selection. You hear a
idle mode to enter the main menu.
to highlight Answering sys, then press
or
to highlight Ans sys setup, then press
or
to highlight Remote code, then press
or
to conirm. You hear a conirmation tone.
119