VTech 15850 User Manual page 18

Or if you want to mount the Range Extender on a wall:
1. Plug the mains power cable into the Range Extender,
thread the cable through the locking slot and then
bundle the power cable with a twist tie.
. Hold the Range Extender in the place where you plan
to mount it. The blue light on
and steady, indicating that the Range Extender has a
good signal from the telephone base.
3. Put the wall mount slot on the back of the Range
Extender over the screw heads and slide the Range
Extender down into place.
4. Plug the other end of the mains power cable into the
mains power wall socket and switch the power on.
Note: Ensure power cord is fed through slot on base
so unit sits lush with the desk.
should remain on
18