VTech 15850 User Manual page 137

3. Release OTB after speaking. Both devices beep once
again and the screens show Press and hold [OTB] to
talk, then you can
press and hold OTB to continue speaking or the
destination device can respond.
4. To end the OTB call, press
place the handset in the telephone base or charger.
The handset shows Broadcast Ended.
Note: After OTB is released, the OTB call remains
open for a short time. If no one presses OTB within
10 seconds, the OTB call ends automatically.
Using the telephone base:
1. There are a few ways to begin a OTB call to a single
handset. When the telephone base is not in use:
• If you have one handset, press and hold OTB.
• If you have more than one handset:
w Press OTB, then use the dialing keys to enter the
destination handset number.
-OR-
w Press
number, then press
The telephone base shows Connecting to VTECH X...
(VTECH represents the handset name,
X represents the destination handset number) for a
few seconds. When the connection is made, both the
telephone base and destination handset display
Press and hold [OTB] to talk.
or to highlight the destination handset
SELECT
13
OFF/ or END, or
CLEAR
or OTB.