Wallmount to tabletop installation
1.
If the telephone line cord and power adapter cord are
bundled, untie them irst. Push the telephone base
up to remove it from the wall. Unplug the telephone
line cord (or DSL ilter) from the wall jack. Unplug the
power adapter from the power outlet.
.
Swivel the wall mount bracket up to tabletop position
and then push it into the telephone base until it clicks
into place.
Plug the telephone line cord (or DSL ilter) into the
3.
wall jack. Plug the power adapter into a power outlet
not controlled by a wall switch. Bundle the telephone
line cord and power adapter cord neatly with twist
ties if necessary.
5