VTech 15850 User Manual page 144

END OR LEAVE A bROADCAsT CALL
Using a handset or the telephone base:
For one-to-one broadcast calls, both initiating and
destination devices can end the broadcast call. For
broadcast calls to multiple devices, the initiating device
can end the broadcast call. If any one of the destination
devices leaves the broadcast call, the call continues
until all participants or the initiator hangs up.
OFF/
Press
CANCEL or
shows Broadcast Ended.
-OR-
Place the handset in the telephone base or charger,
then the handset return to idle mode.
Note: After OTB on the handset or OTB on the
telephone base is released, the broadcast call
remains open for a short time. If no one presses OTB
on the handset or OTB on the telephone base within ten
seconds, the broadcast call ends automatically.
END
or
CLEAR
END
on the telephone base. The screen
on the handset, or press
144