Panasonic AJ-PX800G Operating Instructions Manual page 206

Message
[VERIFICATION FAILED!]
Network
Message
[CANNOT CONNECT!]
[CANNOT FIND FTP-SERVER!]
[LOGIN FAILED!]
[PING FAILED!]
[CANNOT ACCESS GATEWAY!]
[CHECK LAN SETTING]
[IP ADDRESS IS USED!]
[INVALID VALUE!]
[ENCRYPTION IS NOT SUPPORT!]
Chapter 11 Maintenance and Inspection — Warning system
Description
The compare check performed after copying failed.
Description
A connection to the network cannot be established.
The connection destination FTP server cannot be found.
Logging in to the connection destination FTP server
failed.
The [PING] failed.
The gateway server cannot be accessed.
The gateway server cannot be accessed.
The set IP address is being used by another device.
The entered data value is invalid.
Encryption is not supported.
– 206 –
Measure
Copy it again.
Measure
Check that the LAN settings are correct. Check that the
LAN cable is connected correctly and the network you
use is running.
Check that the setting in the main menu → [NETWORK
SETUP] → [FTP CLIENT SERVICE] → [SERVER URL]
is correct.
Check that the settings in the main menu →
[NETWORK SETUP] → [FTP CLIENT SERVICE] →
[LOGIN USER] and [LOGIN PASSWORD] are correct.
Check that the LAN setting and the setting in the
main menu → [NETWORK SETUP] → [FTP CLIENT
SERVICE] → [SERVER URL] are correct. Check that
the LAN cable is connected correctly and the network
you use is running.
Check that the LAN settings are correct.
Check that the LAN settings are correct.
Consult your network administrator and set another IP
address.
Enter data in a valid range.
Check the encryption setting on the destination.