Panasonic AJ-PX800G Operating Instructions Manual page 136

Item
[START]
[LAN PROPERTY] [MAC ADDRESS]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
[SECONDARY DNS]
[DHCP SERVER]
[WIRELESS [MAC ADDRESS]
PROPERTY]
[TYPE]
[SSID INPUT MODE]
[SSID]
[BAND]
[CHANNEL (2.4GHz)]
[CHANNEL (5GHz)]
[ENCRYPTION]
[ENCRYPT KEY]
[DHCP]
[IP ADDRESS]
[SUBNET MASK]
[DEFAULT GATEWAY]
[PRIMARY DNS]
Chapter 6 Menu Operations — Menu list
When [CAMERA] is selected in [START TRIGGER], the streaming distribution is started/stopped from the
camera.
[ON]: Starts streaming.
[OFF]: Stops streaming.
Displays the MAC address of the <LAN> terminal on the camera. (Cannot be changed.)
Sets whether to use automatic acquisition via DHCP. (Mutually exclusive with [DHCP SERVER] setting)
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f Factory setting: [ENABLE]
Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
Sets the default gateway when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
Sets the primary DNS server when [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
Sets the secondary DNS server when [DISABLE] is selected in [DHCP].
f Factory setting: [0.0.0.0]
Sets whether to use the DHCP SERVER function when connected via wired LAN. (Mutually exclusive with
[DHCP] setting)
[ENABLE]: Uses the DHCP SERVER function.
[DISABLE]: Does not use the DHCP SERVER function.
f Factory setting: [DISABLE]
Displays the MAC address of the wireless LAN of the camera. (Cannot be changed.)
Sets the connection method.
[DIRECT]: Accesses to the network function of the camera directly from a smartphone, tablet, or computer.
[INFRA]: Connects to the wireless access point.
f Factory setting: [DIRECT]
Sets the setting method of SSID. When [TYPE] in [WIRELESS PROPERTY] is set to [INFRA], this item
can be set.
[SELECT]: Selects from the access point list.
[MANUAL]: For entering the access point manually.
f Factory setting: [SELECT]
Displays network name (SSID).
f Factory setting: [AJ-PX800] (When the main menu → [NETWORK SETUP] → [WIRELESS PROPERTY]
→ [TYPE] is set to [DIRECT])
Switches between two transmission methods (2.4 GHz or 5 GHz).
[2.4GHz], [5GHz]
f Factory setting: [2.4GHz]
Sets the channels to be used when [DIRECT] is selected in [TYPE], [2.4GHz] is selected in [BAND], and
the camera is connected via wireless LAN.
[AUTO], [CH1], [CH6], [CH11]
f Factory setting: [AUTO]
Sets the channels to be used when [DIRECT] is selected in [TYPE], [5GHz] is selected in [BAND], and the
camera is connected via wireless LAN.
[AUTO], [CH36], [CH40], [CH44], [CH48]
f Factory setting: [AUTO]
Sets the encryption format used when the main menu → [NETWORK SETUP] → [WIRELESS
PROPERTY] → [TYPE] is set to [DIRECT].
[WPA-TKIP], [WPA-AES], [WPA2-TKIP], [WPA2-AES], [NONE]
f Factory setting: [WPA2-AES]
Sets the encryption key. Set the key using a string of 8 to 63 characters or a hexadecimal number with 64
digits.
The menu setting value is displayed with [*].
f Factory setting: [01234567890123456789abcdef] (When the main menu → [NETWORK SETUP] →
[WIRELESS PROPERTY] → [TYPE] is set to [DIRECT])
Sets whether to use automatic acquisition via DHCP when [INFRA] is selected in [TYPE].
[ENABLE]: Uses automatic acquisition.
[DISABLE]: Does not use automatic acquisition. Set [IP ADDRESS], [SUBNET MASK], [DEFAULT
GATEWAY], [PRIMARY DNS], and [SECONDARY DNS].
f Factory setting: [ENABLE]
Sets the IP address when [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.1]
Sets the subnet mask when [DISABLE] is selected in [DHCP].
f Factory setting: [255.255.255.0]
Sets the default gateway when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP].
f Factory setting: [192.168.0.254]
Sets the primary DNS server when [INFRA] is selected in [TYPE] and [DISABLE] is selected in [DHCP], or
when [ENABLE] is selected in [DHCP] and the primary DNS server cannot be obtained.
f Factory setting: [0.0.0.0]
– 136 –
Description of settings