Panasonic AJ-PX800G Operating Instructions Manual page 175

Chapter 9 Connecting to External Devices — Connecting to the remote operation panel (AK-HRP200G)
f When the button light goes off, the function of the skin tone detail is set to [OFF], regardless of the camera's menu setting value.
After restarting the camera, the menu setting value is reflected in AK-HRP200G.
r Matrix button (<MATRIX>)
Operation is not available.
r Adjusted value display area (4 digits), display selector button for the ND filter (<ND>)
Zoom and focus are not supported.
r Character/menu button (<CHARA/MENU>)
It operates in the same way as [CHR] is set, which is displayed in the [SET03:MON/HDMI SETUP] screen of the camera's SmartUI.
@ NOTE
t To connect the camera and AK-HRP200G directly, use a crossover LAN cable.
t To use the camera as a standalone device, the remote control mode must be disabled.
t The operation of connecting via IP and remote controlling the camera from multiple devices such as the AK-HRP200G cannot be guaranteed.
t For details, refer to the Operating Instructions of AK-HRP200G.
t When the camera is connected to AK-HRP200G via IP, the P2 playlist editing function is not available.
– 175 –