Panasonic AJ-PX800G Operating Instructions Manual page 160

[PROXY]
[NETWORK]
[AUDIO] screen
Displays audio settings and the selection status of each recording channel.
[AUDIO]
[A.IN]
[LEVEL]
[F.VR]
[LIMITER]
[LOWCUT]
[METER]
[USER SW] screen
Displays the assignment status of each USER button. For details, refer to "Assigning functions to USER buttons" (page 60).
[OTHER ASSIGN]
[USER SW]
[CAC INFO] screen
Display the operation status or information of CAC.
[CAC CONT]
[CAC MODE]
[CONNECT LENS TYPE]
[SELECT FILE TITLE]
[CAC WARNING]
Chapter 8 Display — Screen status display
[MEDIA]
[MODE]
[PROXY ERROR]
[NETWORK]
[SAMPLE RES]
[CH1/2/3/4]
[CH1/2/3/4]
[CH1/2/3/4]
[CH1/2/3/4]
[CH1/2/3/4]
[CH1/2/3/4]
[GAIN L]
[GAIN M]
[GAIN H]
[S.GAIN]
[WHITE BAL A]
[WHITE BAL B]
[WHITE BAL PRE]
[USER M]
[USER 1]
[USER 2]
[RET SW]
Displays the operation status of CAC.
f [ON]: [ON] has been set in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL] and CAC is active.
f [STOP]: [ON] has been set in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL], however, CAC
operation stops under certain data or lens conditions.
f [OFF]: [OFF] has been set in the main menu → [MAINTENANCE] → [CAC ADJ.] → [CAC CONTROL] and CAC is not
active.
Displays the operation mode of CAC.
f [AUTO]: The CAC file is automatically selected.
Displays the lens ID of the currently connected digital lens.
Displays the title and the file version of the CAC file currently used in the operation. The CAC file can be set in the main menu
→ [MAINTENANCE] → [CAC ADJ.].
Displays a warning when operation of CAC has stopped.
f [CAC LENS DATA INVALID]: This is displayed, for example, when the response data from the lens is not supported.
f [LENS INIT. NOT COMPLETED]: This is displayed, for example, when initialization of the lens cannot complete.
f [CAC FILE DATA NOT FOUND]: Displayed when the chromatic aberration compensation function is set to [ON] and the
chromatic aberration compensation data matching the connected lens.
Displays the media selection status for proxy recording.
[P2]/[P2&SD]/[OFF]
Displays the setting status for proxy recording mode.
[AVC-G6 2CH MOV]/[SHQ 2CH MOV]/[HQ 2CH MOV]/[LOW 2CH MOV]
Displays the operation error on the proxy module.
Displays the network to be used and its status.
Displays the audio recording bits.
Displays the input status of each channel.
[FRONT] (front), [REAR] (rear), [W.L.] (wireless)
Displays the recording level adjustment method currently selected on each channel.
f [MANU]: Displayed when manual adjustment is set.
f [AUTO]: Displayed when automatic adjustment is set.
Settings are performed in the SmartUI [AUD01:LEVEL] screen.
Displays by [ON]/[OFF] whether the <F.AUDIO LEVEL> dial is enabled on the channel to
which [VR] (manual adjustment by adjustment dial) is displayed in [LEVEL].
Displays the limiter settings of each channel.
Displays the lowcut filter status of each channel.
Displays the recording level of each channel.
Displays the gain value assigned to <L> of the <GAIN> switch.
Displays the gain value assigned to <M> of the <GAIN> switch.
Displays the gain value assigned to <H> of the <GAIN> switch.
Enumerates and displays the gain value assigned as super gain.
Displays the color temperature assigned to <A> of the <WHITE BAL> switch.
Displays the color temperature assigned to <B> of the <WHITE BAL> switch.
Displays the color temperature assigned to <PRST> of the <WHITE BAL> switch.
Displays the assignment to the <USER MAIN> button.
Displays the assignment to the <USER1> button.
Displays the assignment to the <USER2> button.
Displays the assignment to the <RET> button on the lens.
– 160 –