Solid-State Drive (M.2) - HP Pavilion x360 Convertible Maintenance And Service Manual

Solid-state drive (M.2)

Description
HP Pavilion x360 Convertible models:
● 128 GB, TLC
● 128 GB, value
HP x360 310 G2 models:
● 256 GB, TLC
● 128 GB, TLC
64 GB, MLC
●
Before removing the solid-state drive, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the bottom cover (see
5. Disconnect the battery.
Remove the solid-state drive:
1. Remove the Phillips PM2.0×3.5 screw (1) that secures the solid-state drive to the system board.
2. Remove the solid-state drive (2) by pulling the drive away from the slot at an angle.
Top cover on page 29).
Spare part number
809555-001
830391-001
824143-001
824142-001
833656-001
Component replacement procedures 35