Page 1
1. Overview Thank you for purchasing PLANET IEEE 802.3at / af Power over Ethernet Injectors. These PoE injectors will work with any Power Device (PD) that also supports the IEEE 802.3af / at standards. The models bellowed are included: Max. PoE Power Pass-thru.
There are two RJ-45 Twisted-Pair jack, one DC 48V Power socket and two LED indicators. Power over Ethernet Injector IEEE 802.3af Figure 1: POE-151 / POE-152 POE-161 There are two RJ-45 Twisted-Pair jack, one DC 56V Power socket and two LED indicators.
2. Connect the long cable that will be used to connect to the remote device to the port “Ethernet+DC”. 3. Connect the AC adapter to “DC 48V” of POE-151/POE-152. The power LED will be steady on. Connect the AC adapter to “DC 56V” of...
Page 4
100Base-TX UTP with PoE Figure 3: Connection to IEEE 802.3af Device 5. Once POE-151/POE-152 detects the existence of an IEEE 802.3af device, the LED indicator will be steady ON to shows it is providing power. The same to POE-161 that detects the existence of an IEEE 802.3at / af device.
Page 5
5.3 PoE Injector and PoE Splitter Installation For non PoE remote device or Ethernet equipment, the PoE Injector and PoE Splitter can runs in pair to provide DC Power for those devices, the table below shows the model of PLANET PoE Splitters: Model PoE Standard DC Power Out Pass-thru. Speed POE-151S IEEE 802.3af 5V / 12V DC 10/100Mbps POE-152S IEEE 802.3af...
6. Product Specification Product POE-151 POE-152 POE-161 Hardware Specification “Data” Input Port 1 x RJ-45 STP “PoE (Data+Power)” 1 x RJ-45 STP Interface Output Port DC Input power 1 x 48V DC 1 x 56V DC socket System: Power x 1 (Green) System: Power x 1 (Yellow)