Table of Contents
Advertisement
11. Reinstall the SCSI backplane in the server:
a.
Reconnect the power cable to the SCSI backplane.
b. Align the SCSI backplane guides with the corresponding slots on the server.
c.
Slide the SCSI backplane into the server.
d. Connect one end of the SCSI cable to the repeater card.
SCSI
backplane
SCSI
repeater
card
e.
Make sure that the other end of the SCSI cable is attached to the power
backplane located on the rear of the shuttle.
SCSI connector on
power backplane
Chapter 2. Installing options
29
Advertisement
Table of Contents
