Table of Contents
Advertisement
Refer to the following illustration when installing memory.
Attention: When you handle static-sensitive devices, take precautions to avoid
damage from static electricity. For details on handling these devices, see "Handling
static-sensitive devices" on page 8.
To install a memory module:
1.
Review the information in "Before you begin" on page 7 through "Handling
static-sensitive devices" on page 8.
2.
Turn off the server and remove the power cords.
3.
Remove the top cover.
4.
Remove the processor housing cover and remove the memory board assembly
from the server.
5.
Select the connectors in which to install the DIMMs.
6.
Install the DIMMs in the connectors.
7.
Replace the memory board assembly in the server and replace the processor
housing cover.
8.
Install the top cover.
9.
Connect all cables and power cords.
Pop rivets
Processor housing
cover
DIMM
Memory board
Chapter 2. Installing options
23
Advertisement
Table of Contents
