Table of Contents
Advertisement
8.
Touch the static-protective package that contains the repeater card option to any
unpainted metal surface on the server; then, remove the repeater card option from
the package.
Note: If necessary, refer to the documentation that comes with the repeater card
option kit to assemble the repeater card option.
9.
Connect the repeater card option to the SCSI backplane:
a.
Align the corresponding connectors on the repeater card and the SCSI
backplane. The corresponding screw holes on the repeater card and the SCSI
backplane will automatically align.
b. Use a small, flat-blade screwdriver to connect the repeater card to the SCSI
backplane with the two screws from the repeater card option kit.
c.
Secure the repeater card with the retention clips on the SCSI channel A
connector on the SCSI backplane.
Backplane
Retention clips
SCSI repeater card
screws
Chapter 2. Installing options
27
Advertisement
Table of Contents
