Brother ImageCenter ADS-2400N User Manual page 288

Troubleshooting
Difficulty Cause
Cannot find how to —
start ControlCenter2
(Macintosh).
Cannot find how to —
configure the settings
to scan from the
Control Panel of the
machine.
(ADS-2400N /
ADS-3000N)
Cannot save the 
settings in Remote

Setup or Web Based
Management.
Cannot start Remote 
Setup.




The machine is processing.
The machine is being configured
from the machine's Control Panel.
The machine is turned off.
The machine is not connected to
your computer.
An error is occurring.
The machine is scanning.
The machine is being configured
from the machine's Control Panel.
Suggestions
To start ControlCenter2, click the
(ControlCenter2) icon in the Dock. If the
(ControlCenter2) icon is not displayed in
the Dock, in the Finder menu bar, click Go >
Applications > Brother, and then double-click
the (ControlCenter2) icon. The
(ControlCenter2) icon appears in the Dock.
Use Remote Setup. See Set Up the Brother
Machine from Your Computer on page 235.
 Wait until the machine finishes processing and
then try again.
 Stop configuring the machine from the Control
Panel.
 Turn on the machine, and then try again.
 Connect the machine to your computer, and
then try again.
 Clear all errors, and then try again.
 Wait until scanning has finished and try again.
 Stop configuring the machine from the Control
Panel.
10
272