Routine Maintenance
NOTE
(ADS-2800W / ADS-3600W)
When the Scheduled Maintenance alert is displaed, you must clean the machine promptly. If you
do not, document jams and paper feed problems may occur.
Clean the glass strips with a non-flammable glass cleaner. When finished, run your fingertip over the glass
to see if you feel anything on it. If you feel dirt or debris, clean the glass again, concentrating on that area.
You may have to repeat the cleaning process three or four times. To test, scan a document after each
cleaning attempt.
When there is a spot of dirt or
correction fluid on the glass
strip the scanned sample
shows a vertical line.
After the glass strip is cleaned
the vertical line is gone.
9
244