Brother ImageCenter ADS-2400N User Manual page 157

Scan Using Your Computer
WIA (Ver 1) Driver Settings
1 Paper source
You can select only Document Feeder.
2 Picture Type (Image Type)
Select Color picture, Grayscale picture, Black and white picture or text, or Custom Settings.
To change advanced settings, click Adjust the quality of the scanned picture.
 Resolution
Select a scanning resolution from the Resolution text box. Higher resolutions take more memory and
transfer time, but produce a finer scanned image.
 Brightness
Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is
suitable for most images. Set the Brightness level by dragging the slider to the right or left to lighten or
darken the image. You can also enter a value in the box to set the level. If the scanned image is too light,
set a lower Brightness level and scan the document again. If the image is too dark, set a higher Brightness
level and scan the document again.
 Contrast
Adjust the setting (-50 to 50) to get the best image. The default value of 0 represents an average and is
suitable for most images. Increase or decrease the contrast level by moving the slider to the right or left.
An increase emphasizes dark and light areas of the image, while a decrease reveals more details in gray
areas. You can also enter a value in the box to set the Contrast.
1
2
6
6
141