Brother ImageCenter ADS-2400N User Manual page 270

Routine Maintenance
4
Slide the new Reverse Roller a into the opening on the left and place it into the machine.
5
Close the Reverse Roller Cover.
6
Close the Front Cover.
7
Reset the Reverse Roller Counter (see Reset the Usage Counters on page 255).
NOTE
Confirm the following:
• The value of the Reverse Roller Count is 0 (see Check Supplies Replacement Cycle (ADS-2400N /
ADS-3000N) on page 247).
• The error message on the Status Monitor has been cleared.
• The Touchscreen or LED indication does not indicate Replace Reverse Roller.
1
9
254