Send Scanned Documents Directly To An Email Address (Ads-2800W / Ads-3600W) - Brother ImageCenter ADS-2400N User Manual

Scan Using the Control Panel
Send Scanned Documents Directly to an Email Address
(ADS-2800W / ADS-3600W)
1
Load your document.
2
Swipe left or right, or press d or c to display Scan 2.
3
Press to E-mail Server.
4
Select the email address you want to send to by doing one of the following:
 To select an email address from the Address Book, see Select an Email Address from the Address
Book on page 205.
 To enter an email address manually, see Enter an Email Address Manually on page 206.
NOTE
You can select up to 300 email addresses from the Address Book and enter up to 50 email addresses
manually. The scanned data will be sent to all of the addresses at the same time.
5
Press OK and then do one of the following:
To use the default settings, go to 8.

To change the default settings, go to 6.

6
Press Options.
7
Configure the following settings as needed. To configure more detailed settings, press Advanced
Settings. For more information, see page 227. Press OK.

2-sided Scan

Scan Type

Resolution

File Type

Document Size

File Name

File Name Style

File Size

Auto Deskew

Skip Blank Page

Advanced Settings
NOTE
• To save the settings as a new default, press Set New Default.
• To restore all settings to the factory settings, press Factory Reset.
7
7
204