Brother ImageCenter ADS-2400N User Manual page 234

Scan Using the Control Panel
7
Change the settings.
The following settings can be changed.
Setting Description
Auto Deskew Corrects the skew (less than 0.36 in. (9 mm) from the
center of the document to the edge) of the scanned
1
data.
left edge of the
paper feed tray
Scanning
direction
Auto Image Changes the direction of the document based on the
Rotation text orientation.
Remove Prevents bleed through on a two-sided document, and
Bleed- also allows you to remove the base color of documents,
through / such as newspapers, to make the scanned data more
Pattern/ recognizable.
Remove
The sensitivity of the Remove Bleed-through / Pattern /
Background
Remove Background Color function can be adjusted with
Color
the sliders. Moving the slider toward "High" will make the
scanner more likely to Remove Bleed-through / Pattern /
Remove Background Color, while moving it toward "Low"
will make the scanner less likely to Remove Bleed-
through / Pattern / Remove Background Color.
Skip Blank Removes blank pages of the document from the
Page scanning results.
Multifeed Uses a ultrasonic sensor to detect when a multifeed has
Detection occurred. When this function detects a multifeed,
confirm that the data scanned before the multifeed has
been saved, and then start scanning again at the next
page or the beginning of the document.
center of the
transport path
center of the
document
less than 9 mm
1
1
1
Applicable Feature
Image OCR
Yes Yes
right edge of the
paper feed tray
Yes Yes
Yes Yes
Yes Yes
Yes Yes
E-mail File Print
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
Yes Yes Yes
218
7