Scan A Specific Area; Adjust Brightness; Adjust Contrast - Brother ImageCenter ADS-2400N User Manual

Scan Using the Control Panel

Scan a Specific Area

Cropping allows you to scan a portion of the document.
1
Press (Settings).
2
Press Initial Setup.
3
Press Scan offset correction.
4
Select Front Page Offset or Back Page Offset.

Adjust Brightness

You can adjust the brightness of the scan document. Adjust the setting (-50 to +50) to get the best image.
If the scanned image is too light, set a lower Brightness level and scan the document again. If the image
is too dark, set a higher Brightness level and scan the document again.
1
Swipe left or right to display the Scan-to action you want to do (to PC, to Network, to FTP/SFTP,
to E-mail Server, to SharePoint, to USB).
2
Select the Scan-to action you want to do.
3
Press Options.
4
Press Advanced Settings.
5
Press Brightness.
6
Select -50 to 50.

Adjust Contrast

For most documents the default setting of 0 will give the best results. 0 automatically chooses the appropriate
contrast for your document. If your document is very light or very dark, changing the contrast may improve
the quality of the scan. If the scanned image is too light, set a lower contrast level and scan the document
again. If the image is too dark, set a higher contrast level and scan the document again.
1
Swipe left or right to display the Scan-to action you want to do (to PC, to Network, to FTP/SFTP,
to E-mail Server, to SharePoint, to USB).
2
Select the scan-to action you want to perform.
3
Press Options.
4
Press Advanced Settings.
5
Press Contrast.
6
Select a value from -50 to 50.
7
7
7
7
228