Removing The Operation Unit; Removing The Left Cover - Canon FAX-L380S Series Service Manual

2) Remove the two screws [1] on the back side.
3) Open the operation panel. As you disengage the claw [1], remove the left
cover [2].
[1]
[2]

3.1.5.3 Removing the Left Cover

/ / FAX-L390
1) Open the front cover [1], and remove the two screws [2] on the front side.
[2]
2) Remove the two screws [1] on the back side.
3) Open the operation panel. As you disengage the claw [1], remove the left
cover [2].
[1]
F-3-30
F-3-31
[1]
F-3-32
[1]
F-3-33
[2]

3.1.5.4 Removing the Operation Unit

/ / FAX-L390 / / / FAX-L380S
1) Disengage the two claws [1] and remove the rear cover from the operation
panel [2].
[1]
0011-6157
F-3-35
2) Slightly open the operation panel unit [1], and detach the strap [2].
3) Open the operation panel unit, and remove the two screws [3]. Care should
be taken when removing the screws so that the operation unit does not fall
down from the upper document guide.
[3]
F-3-36
4) Remove the operation unit [1] from the upper document guide [2].
5) Remove the connector [3] and flat cable [4], and detach the operation unit.
[3]
[4]
[1]
F-3-37
[1]
F-3-34
[2]
[1]
[3]
[2]
[2]
Chapter 3
0011-4719
3-5