Removing The Dcnt Board; Power Supply Pcb; Removing The Cassette; Removing The Right Cover - Canon FAX-L380S Series Service Manual

Chapter 3
[4] [3]
[3]
F-3-52

3.1.7.5 Removing the DCNT Board

/ / FAX-L390 / / / FAX-L380S
1) Take the flat cable [1] off the cable guide.
2) Remove the screw [2] and remove the switch cover [3].
[1]
F-3-53
3) Remove the seven connectors [1] and the two flat cables [2].
4) Free the cable from the cable retainer [3].
5) Remove the three screws [4] and, while carefully watching the sensor flag,
remove the DCNT board [5].
[4] [1]
[1]
[1] [2]
F-3-54

3.1.8 Power Supply PCB

3.1.8.1 Removing the Cassette

/ / FAX-L390 / / / FAX-L380S
3-8
[2]
[1] [3]
[3]
[2]
[2] [4]
[5]
[1]
[3]
[4]
1) Remove the cassette by holding the cassette handle.

3.1.8.2 Removing the Right Cover

/ / FAX-L380S
1) Open the front cover [1], and remove the two screws [2] on the front side.
2) Remove the two screws [1] on the back side.
0011-4726
[1]
3) Open the operation panel. As you disengage the claw [1], remove the right
cover [2].
3.1.8.3 Removing the Right Cover
/ / FAX-L390
1) Open the front cover [1], and remove the two screws [2] on the front side.
2) Remove the two screws [1] on the back side.
0011-4728
[2]
[1]
F-3-55
F-3-56
[1]
[2]
F-3-57
[2]
[1]
F-3-58
0011-4729
0011-6237