[4]
[3]
[3]
F-3-144
3.1.12.10 Removing the Power Supply Shield Plate
/ / FAX-L390 / / / FAX-L380S
1) Remove the five screws [1] to remove the power supply shield plate [2].
[2]
[1]
[1]
F-3-145
3.1.12.11 Removing the Paper Delivery Sensor
/ / FAX-L390 / / / FAX-L380S
1) Remove the connector [1] on the DCNT board and take the cable off the
cable guide. (The external cover is omitted from the illustration.)
2) Remove the screw [2] and remove the paper delivery sensor [3].
[3]
[2]
F-3-146
3.1.13 Paper Full Sensor
3.1.13.1 Removing the Cassette
/ / FAX-L390 / / / FAX-L380S
1) Remove the cassette by holding the cassette handle.
3.1.13.2 Removing the Right Cover
/ / FAX-L380S
1) Open the front cover [1], and remove the two screws [2] on the front side.
[2]
[1]
[3]
[1]
2) Remove the two screws [1] on the back side.
0011-6306
[1]
3) Open the operation panel. As you disengage the claw [1], remove the right
cover [2].
0011-6307
3.1.13.3 Removing the Right Cover
/ / FAX-L390
1) Open the front cover [1], and remove the two screws [2] on the front side.
0011-4756
2) Remove the two screws [1] on the back side.
0011-4757
Chapter 3
[2]
[1]
F-3-147
F-3-148
[1]
[2]
F-3-149
[2]
[1]
F-3-150
0011-6313
3-21