Removing The Power Supply Assembly; Removing The Main Motor; Gear Unit; Removing The Cassette - Canon FAX-L380S Series Service Manual

Chapter 3
[2]
[1]
[1]
F-3-349

3.5.6.11 Removing the Power Supply Assembly

/ / FAX-L390 / / / FAX-L380S
1) Remove the three screws [1].
2) Remove the six connectors [2] as well as the flat cable [3] on the DCNT
board.
[1] [2] [2]
F-3-350
3) As you remove the bosses on both sides [1], lower the front part of the
power supply assembly [2]. Then pull it to remove the power supply
assembly.
[2]
[1]
F-3-351

3.5.6.12 Removing the Main Motor

/ / FAX-L390 / / / FAX-L380S
1) Place the main unit down on its front face (so that the interior of the main
unit is easily visible).
2) Remove the two screws [1] to remove the main motor [2].
[2]
[1]
F-3-352

3.5.7 Gear Unit

3.5.7.1 Removing the Cassette

/ / FAX-L390 / / / FAX-L380S
1) Remove the cassette by holding the cassette handle.
3-50
[3]
[1]

3.5.7.2 Removing the Right Cover

/ / FAX-L380S
1) Open the front cover [1], and remove the two screws [2] on the front side.
0011-4837
2) Remove the two screws [1] on the back side.
[1]
3) Open the operation panel. As you disengage the claw [1], remove the right
cover [2].

3.5.7.3 Removing the Right Cover

/ / FAX-L390
0011-4838
1) Open the front cover [1], and remove the two screws [2] on the front side.
2) Remove the two screws [1] on the back side.
0011-6354
[2]
[1]
F-3-353
F-3-354
[1]
[2]
F-3-355
[2]
[1]
F-3-356
0011-6355
0011-6356