Table of Contents
Advertisement
OK! Let's check up you modem. Skip the next paragraph to the Testing your
modem
If you got a failed installation in last Plug-N-Play automatically process. You may try
the following process for manual installation. If you still could not accomplish the modem
installation. Please contact to your dealer for the service.
With Manual Installation :
A). G
et into the SETUP in the Start button
[CONTROL PANEL] à [SYSTM] à [DEVICE MANGER]
à[FLASH]
, and waiting for new modem detection. We recommend you to use the auto-detection
for COM port assigning. Or you must make sure that which COM port you use.
B). When the auto-detection is stop and the modem is found. Windows 95/98 would show
a standard modem was found cause of she could not recognize the name of
manufacture. So we must [Change] the name for modem.
Click on the [CHANGE... ] button.
C). Point to the disk which we have prepared.
Then pick a file named "3450RDK.INF".
Select "Motorola MC143450RDK" for the model of modem. Now click
the [Next ]. Then Windows 95/98 will copy some related date into the system by
automatic.
D). After the modem is installed in your computer system, reboot the computer
system and waiting for it started.
Testing your modem with Windows 95
Before you using any communication application to reach the modem, use the following
procedure to verify your new installed modem's operation.
Turn on your computer and modem, use the following step to verify your new installed
modem.
1. Return to CONTROL PANL and double click on your Modems icon. You should see
your modem listed as shown in following figure 1.5.
Advertisement
Table of Contents
