Motorola ME-560M User Manual page 36

Range:
Default:
S12 Escape Guard Time
S12 determines the escape guard time. The escape guard time is the minimum waiting time
required before and after entered the escape code (three consecutive escape characters) in the
on-line state. It is also the maximum waiting time allowed between any two consecutive escape
characters. If the waiting time before or after the escape code is shorter than the guard time, or
if the waiting time between consecutive escape characters is longer than the guard time, then
the modem does not recognize the escape command and stays on-line.
If the escape guard time is set at 0 second, it is impossible to return the modem to command
state.
Range:
Default:
S13 Reserved
S14 Bit Mapped Options (Reserved)
S15 Reserved
S17 Reserved
S18 Test Timer
The test timer determines how long tests are performed. The modem automatically ends the test
when the test time is expired. The default value of 000 disables the test timer. When the timer is
thus disabled, all tests must be ended with the &T0 command.
Range:
Default:
S21 V.24/General Bit Mapped Options
S22 SPEAKER/Results Bit Mapped Options
Default:
S23 Bit Mapped Options
Default:
S24 Sleep Inactivity Timer
Set the length of time, in units of 10 seconds, that the modem will operate in normal mode with
no detected telephone line of DTE line activity before entering low-power sleep mode.
Range:
Default: 0
50 - 255 milliseconds.
95
0 - 255 1/50 of a second.
50 (1 second)
0 - 255 seconds.
0
117 (75h) (01110101b)
55 (37h) (00110111b)
0 - 255 (seconds)