Table of Contents
Advertisement
Table 2.10
AT command for Country Select
Country Select Command
Country Select -- Reserved
Table 2.11
AT commands for Caller ID
Caller ID Commands
#CID=n - Caller ID
#CID?
#CID=?
Table 2.12
Synchronous Access commands
Synchronous Access Mode
+ES=<orig_rqst>,<orig_fbk>,<ans_fbk> - Synchronous
Access Mode
Description
1=Austria, 2=Belgium, 3=Denmark, 4=Finland, 5=France,
6=Germany, 7=Ireland, 8=Italy, 10=Netherlands, 11=Norway,
12=Portugal, 13=Spain, 14=Sweden, 15=Switzerland, 16=UK,
17=Greece, 18=Israel, 19=Czech Republic, 20=Canada,
21=Mexico, 22=USA*, 23=Hungary, 24=Poland, 25=Russia,
26=Slovac Republic, 27=Bulgaria, 30=India, 40=Australia,
41=China, 42=Hong Kong, 43=Japan, 44=Korea, 46=Taiwan,
47=Singapore, 48=New Zealand, 50=Argentina, 52=Brazil,
54=Croatia, 56=Emea, 58=Indonesia, 60=Malaysia,
62=Philippines, 64=Romania, 66=Slovenia, 68=South Africa,
70=Thailand, 72=Ukraine, 74=Venezuela
Description
0=disable*
1=enable (formatted)
2=enable (unformatted)
Query current
Query range shows 0,1,2
Description
<orig_rqst>
1=Initiate call with buffered mode only.
2=Initiate V.42 without detection phase. If V.8 is in use, this is a
request to disable V.42 detection phase.
3=Initiate V.42 with detection phase*.
4=Initiate alternative protocol.
6=Initiate Sync Access Mode when connection is completed and
data state is entered.
<orig_fbk>
0=Error control optional* (either LAPM or Alternative
acceptable); if error control not established, maintain DTE-DCE
data rate and use V.14 buffered mode with flow control during
non-error-control operation
2=Error control required (either LAPM or Alternative
acceptable); if error control not established, disconnect.
3=Error control required (only LAPM acceptable); if error control
not established, disconnect.
4=Error control required (only Alternative mode acceptable); if
error control not established, disconnect.
<ans_fbk>
1=Error control disabled. Use buffered mode.
2=Error control optional*. Either LAPM or Alternative
acceptable. If error control not established, maintain DTE-DCE
data rate and use local buffering and flow control during non-
error-control operation.
Advertisement
Table of Contents
