Motorola ME-560M User Manual page 38

S33 XOFF Character
Range:
Default:
S36 LAPM Failure Control
This register is read when the S48 register contains the value 128 or if an attempted
Error-Correction link fails.
S37 Desired Line Connection Speed
Default:
S38 Delay Before Forced-Disconnect
This register controls how long the modem waits, after receiving the ATH command or loss of
DTR, before it disconnects from the telephone line. When connected in an error-corrected
mode, you can use this register to ensure that all data is transmitted from the modem's buffer
before the modem disconnects.
If you set S38 between 0 and 254, the modem waits that number of seconds for the remote
modem to acknowledge all data before it disconnects. If you set S38 to 255, the modem waits
indefinitely for the remote modem to acknowledge all data.
Range:
Default:
S39 Flow Control
Default:
S40 General Bit Mapped Options
Default:
S41 Bit-Mapped Options (Reserved)
S46 Protocol Selection
This register controls whether the modem tries to use data compression when the modem
establishes an error corrected link. The default is for the modem to use data compression (138).
S48 V.42 Negotiation Action (Reserved)
S82 Break Handling Option
S82 is for compatibility purposes only, changing this register will not any affect.
S86 Call Failure Reason Code
0 - 255, ASCII decimal
19
0
0 - 255 seconds
20
3 (00000011b)
104 (68h) (01101000b)