Replacing The Display Bezel; Procedure; Post-Requisites - Alienware 13 R2 Service Manual

Replacing the display bezel

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1
Connect the logo-board cable to the logo board.
2 Slide the display-board cables to their respective connectors on the logo
board and press down the latches to secure the cables.
3 Turn the display bezel over.
4
Align the display bezel with the display back-cover and gently snap the
display bezel into place.

Post-requisites

1
Replace the display
2 Follow the procedure from step 5 to step 9 in "Replacing the
3
Follow the procedure from step 3 to step 7 in "Replacing the
drive".
4
Replace the base
94
Before working inside your
assembly.
panel.
computer. For more safety best
computer.
palm rest".
solid-state