Replacing The Display Panel; Procedure; Post-Requisites - Alienware 13 R2 Service Manual

Replacing the display panel

WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

NOTE: This chapter is applicable only if you have purchased a laptop with
non-touchscreen display.
1
Connect the display cable to the display panel and press down on the
connector latch to secure the cable.
2
Turn the display panel over.
3 Align the screw holes on the display panel with the screw holes on the
display back-cover.
4 Replace the screws that secure the display panel to the display back-cover.

Post-requisites

1
Replace the display
2 Replace the display
3
Follow the procedure from step 5 to step 9 in "Replacing the
4 Follow the procedure from step 3 to step 7 in "Replacing the
drive".
5 Replace the base
98
Before working inside your
bezel.
assembly.
panel.
computer. For more safety best
computer.
palm rest".
solid-state