Replacing The Coin-Cell Battery; Procedure; Post-Requisites - Alienware 13 R2 Service Manual

Replacing the coin-cell
battery
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Procedure

1
Adhere the coin-cell battery to the system board.
2 Connect the coin-cell battery cable to the connector on the system board.

Post-requisites

1
Follow the procedure from step 2 to step 7 in "Replacing the
port".
2
Replace the display
3 Follow the procedure from step 5 to step 9 in "Replacing the
4
Follow the procedure from step 3 to step 7 in "Replacing the
drive".
5
Replace the base
Before working inside your
assembly.
panel.
computer. For more safety best
computer.
power-adapter
palm rest".
solid-state
77