Removing The Power-Adapter Port; Prerequisites; Procedure - Alienware 13 R2 Service Manual

Removing the power-
adapter port
WARNING: Before working inside your computer, read the
safety information that shipped with your computer and
follow the steps in
After working inside your computer, follow the instructions
in After working inside your
practices, see the Regulatory Compliance home page at
www.dell.com/regulatory_compliance.

Prerequisites

1
Remove the
2 Follow the procedure from step 1 to step 5 in "Removing the
drive".
3 Follow the procedure from step 1 to step 8 in "Removing the
4
Remove the

Procedure

1 Remove the screw that secures the power-adapter port bracket to the
power-adapter port.
2 Lift the power-adapter port bracket off the power-adapter port.
3
Release the power-adapter port from the computer base.
Before working inside your
base panel.
display assembly.
computer. For more safety best
computer.
solid-state
palm rest".
63