Date And Time - Avaya T3 Classic User Manual

_______________________________________________________________________________

Date and time

The date and time are shown in the system telephone display. They are generated by a time module
in the system and sent to the display every minute.
After initial system start-up, a random date and time are displayed.
You will therefore have to program the current date and time after system start-up.
When connecting the telecommunications system to ISDN exchange lines, the time module for
establishing an outgoing connection is synchronised to the time and date of the network provider.
The prerequisite for this is that the network provider sends this information when the connection is
established.
Programming:
Settings
System functions
Set to selection
Date/Time
OK
OK
Date and time should be changed from 14.11.00 02:22 to 15.12.01 03:33.
OK
1 5 1 2 0
0 3 3 3
OK
Esc Esc
15
Line 1 Line 2
14.11.00 02: 22
14.11.00 02: 22 _
1
14.11.00 02: 22
Exit programming
18.09. 11:48
11 12
System functions
15.12.01 03:33
61