Loading Ribbon - Monarch 9494 Operator's Handbook Manual

4. To close the printer, push the printhead assembly toward
the front of printer, close the label guide and latch the face
plate into place.
Loading Ribbon–––––––––––––––––––––––––––––––––––––––––––––
Use ribbon only when printing on thermal transfer labels.
To load the ribbon cassette into the printer:
1. Open the printer and remove the ribbon cassette.
2. Slide a new ribbon cassette onto the printhead assembly
until it slips into place.
3. Close the printer.
Make sure the ribbon is wound tightly inside the cassette
before you close the printer. See "Reloading a Ribbon
Cassette" to wind the ribbon.
Ribbon Cassette
Chapter 2. Loading Ribbon and Supplies
Printhead Assembly
2-3