Monarch 9494 Operator's Handbook Manual page 26

9494 Operator's Handbook
7. Close the printer.
Make sure the ribbon is wound tightly inside the ribbon
cassette before you close the printer. See "Reloading a
Ribbon Cassette" to wind the ribbon.
8. Turn the printer on.
9. Wait until the LED flashes one time (about five seconds)
and then press the trigger. The printer calibrates the label
strip for printing.
Trigger
The LED slowly alternates flashing amber and green to
indicate the printer is out of labels. When this happens, load a
new roll of labels and press the trigger to clear the error.
2-14
Upper
Opening
Label
Guide
Lower
Opening
LED