Sewing; Manual Sewing (Side Seams) - Pfaff 3827-4/33 Instruction Manual

Sewing

10 Sewing
In the sewing mode all relevant settings for the sewing operation are displayed. Functions
can be switched on or off by pressing a key. Values for the most important parameters can
be changed directly.
A difference is made between manual sewing (side seams) and programmed sewing
(shoulder seams). To change from manual to programmed sewing. Press the PM key.
10

Manual sewing (side seams)

.01
The side seams are sewn in the manual sewing mode.
Further functions, also see Chapter 7.07.02 Function keys:
10 - 1
Switch on the machine.
If necessary, call up manual sewing.
10
If necessary, change the tack value, also see Chapter 9.09 Entering the start and end
backtacks.
If necessary, change the maximum speed, see Chapter 9.08 Entering the maximum
speed.
If necessary, change the number of stitches for the fullness with the corresponding
+/- keys, see Chapter 9.07 Pre-selecting the stitch length and fullness.
Start backtacks on/off
End backtacks on/off
Needle position raised on/off
Presser foot raised on/off
Presser foot raised after
thread trimming on/off
Sewing is carried out with the pedal functions, see Chapter 7.02 Pedal.
0 3
Thread trimming on/off
Fixed speed on/off
Reverse sewing on/off
Programmed stop on/off
Stitch count on/off