Adjustment
12
Hardware-test
.09
The hardware test is a test program, which makes it possible, with the aid of the control
panel, to check various components of the control system and the machine installation.
The test consists of seven test blocks.
12.
Carrying out the hardware test
09.01
12.
Test block 1 - inputs
09.02
12 - 46
Switch on the machine.
Select service level "C" (see Chapter 12.07.02 Selecting the user level).
Select parameter 797 and set it at "ON" by pressing the appropriate +/- key.
The first test block appears on the display.
The next test blocks can be selected by pressing the +/- "A" key.
The individual inputs and outputs can be selected by pressing the +/- "B" key.
E 1
X 5:
5
A
B
E 1
X5:
5
Input
Connector
Input
number
Contact
number
The functions allocated to the inputs displayed can be found in Chapter 12.10
Connection plan for the X5 plug.
0
0
Input status
0 = switch open
1 = switch closed