Pilot Tube (Ceramic-Radiant Burner); Pilot (Infrared Burner) - Vulcan-Hart VBB1F Service Manual

V-SERIES HEAVY DUTY BROILERS, DOUBLE DECK AND RANGE MATCH MODELS - REMOVAL AND
9. Reverse procedure to install replacement valve.
10. Check for proper operation.
PILOT TUBE (CERAMIC-RADIANT
BURNER)
Shut off the gas before servicing the
unit.
All gas joints disturbed during
servicing must be checked for leaks. Check with a
soap and water solution (bubbles). Do not use an open
flame.
1. Remove MANIFOLD COVER.
2. Remove screws securing pilot tube mounting
bracket to broiler.
Fig. 8
3. Pull the pilot tube assembly Fig. 9 away from
broiler. There are 3 pilot tubes on each assembly.
4. Disconnect compression nut Fig. 9 from the pilot
tube fitting and remove the tube.
Fig. 9
When disconnecting compression nut
from the pilot tube fitting, support the fitting to prevent
damage to pilot tubing.
REPLACEMENT OF PARTS
5. Reverse procedure to install and check for proper
operation.

PILOT (INFRARED BURNER)

unit.
servicing must be checked for leaks. Check with a
soap and water solution (bubbles). Do not use an open
flame.
1. Remove MANIFOLD COVER.
2. Disconnect compression fitting [1] Fig. 10 for pilot
gas tubing.
3. Remove screw [2] Fig. 10 and lock washer nut [3]
Fig. 11 securing pilot to mounting bracket.
Page 7 of 16
Shut off the gas before servicing the
All gas joints disturbed during
Fig. 10
F45548 (0715)