Computer Problems - Gateway E-1600 System Manual

The computer does not recognize the CD drive.
Probable cause
The CD is not intended for PC
use
The CD drive needs to be
added as new hardware
The secondary IDE device
may be disabled
The CD cables are not
installed correctly
The CD drive may be
defective

Computer problems

The computer will not start.
Probable cause
The computer is not
connected to an AC outlet
The voltage selection switch
is not set correctly
60
Troubleshooting
Solution
Make sure the CD is PC-compatible.
In the Control Panel window (Start | Settings |
Control Panel), double-click Add New
Hardware. Follow the on-screen instructions
for adding the drive.
Restart your computer, then press F1 to open
the BIOS Setup utility program. From the
Advanced | IDE Configuration menu, set the
IDE Controller to Both and the Secondary
IDE Master to Auto.
Open the computer and make sure all cables
between the CD controller and the CD drive
are connected correctly.
Replace the CD drive.
Solution
Make sure the power cable(s) are connected
correctly to an operating AC power source.
Make sure the voltage selection switch is set
to the correct power source.