Checking System Health With Landesk; System Recovery; Creating A Startup Diskette - Gateway E-1600 System Manual

Checking system health with LANDesk

®
LANDesk
monitor the health of your system components. Through LANDesk, you can
view software and hardware properties. You can also set LANDesk to notify
you when system resources reach certain levels.
To install LANDesk Client Manager:
1
In the C:\DMI folder on your hard drive, double-click the
launch the install wizard.
2
Follow the instructions that appear on the screen. If you are prompted
for a password during the installation process, type lowtco.
LANDesk Client Manager comes with complete electronic documentation and
online help. Refer to these documents and the online Help for more
information.
If you need to restore LANDesk from the System Restoration CD and are
prompted for a password, type lowtco and press E

System recovery

Take advanced precautions that will allow you to restart your system and
recover damaged files in the event that your hard drive is damaged, or your
BIOS or system files get corrupted.

Creating a startup diskette

If your computer hard drive is damaged, you may not be able to start the
computer from the hard drive. A startup diskette is a bootable diskette that
enables you to start the computer and attempt to fix the problem.
Some operating systems prompt you to create a startup diskette as part of the
setup process and some will allow you to create one at any time. Refer to the
software documentation or see the online help for your operating system for
specific instructions.
Client Manager is a desktop management interface that lets you
icon to
Setup
.
NTER
System recovery
53