TiX520, TiX560
Users Manual
i
Voice Annotation (Recording)
A Bluetooth headset is required and the radio must be
enabled for voice (audio) recording. This feature may not
be available in all regions.
To record:
1. With an infrared image in the buffer, push to open
the EDIT IMAGE menu.
2. Push / to highlight Add Audio.
3. Push to record up to 60 seconds of audio. The
display updates to show the recorded time.
4. Push to pause the recorder.
5. Push when done.
6. Push to review the audio file or to save the
audio with the image.
Voice annotation is only available in the .is2 file format and
is stored in the file so you do not need to collate multiple
files at a later time.
Listen to a Voice Annotation (Recording)
i
The
icon identifies each file that has a voice
annotation. The voice (audio) recording replays through a
Bluetooth headset or when you use SmartView software.
18
To play back:
1. Do the steps in the Review Image Files section on
page 33 to see the image on the display.
2. Push .
3. Push to set Audio.
4. Push to listen to the audio.
5. Push again to pause the audio.
Edit Captured Infrared Image
Before and after you save a file, use the Imager to edit or
modify the image. You can add IR-PhotoNotes, voice
annotation, and text annotation as well as change the
palette and IR Fusion mode.
A Bluetooth headset is required and the radio must be
enabled for voice (audio) annotation. This feature may not
be available in all regions.
To edit:
1. With an image in the buffer, go to EDIT IMAGE > Edit
Image.
2. Push any arrow button to highlight an option or use the
touch screen to select an option.
3. Push to save the changes with the file.