Remote Control Of Imager; Accessories - Fluke Ti300 PRO User Manual

Remote Control of Imager

Use SmartView software on a PC or the Fluke Connect app on a mobile device to remotely control the Imager.
To remotely control the Imager with a PC:
1. Turn on Remote Display. See
2. In SmartView software, select SmartView (Camera is the default selection).
When in remote control mode, use the SmartView software to control all the menus on the Imager. The menus
cannot be changed directly on the Imager.
To remotely control the Imager with the Fluke Connect app:
1. Set up the Fluke Connect system. See
2. On the mobile device, tap on the streaming image.
An option shows to Remote Control the Imager.
3. Select Yes.
From the mobile device, you can change the IR-Fusion setting, select Auto Focus to turn on LaserSharp Auto
Focus, or tap the green Capture button to take an image. You can change the other menu items on the Imager
directly even while the mobile device remotely controls the Imager.

Accessories

Table 18 is a list of the accessories available for the Imager.
Model
FLK-TI-SBP3
FLK-TI-SBC3B
TI-CAR CHARGER
FLUKE-TI-VISOR3
FLUKE-TI-TRIPOD3
FLK-Bluetooth
BOOK-ITP
FLK-LENS/TELE2
FLK-LENS/WIDE2
FLK-LENS/4XTELE2
FLK-LENS/25MAC2
Stream Live to a PC.
Fluke Connect Wireless
Table 18. Accessories
Description
Smart Battery Pack
Charging Base/Power Supply with Adapters
12 V Vehicle Charger Adapter
Sun Visor
Tripod Mounting Accessory
Bluetooth Headset
Introduction to Thermography Principles
2X Telephoto Infrared Lens
Wide-Angle Infrared Lens
4X Telephoto Infrared Lens
25-Micron Macro Infrared Lens
Professional Series Thermal Imagers
Remote Control of Imager
System.
PN
3440365
4354922
3039779
4335377
4335389
4603258
3413459
4335377
4335361
4607058
4607064
41