Table of Contents
Advertisement
To show the Imager Info:
1. Go to Settings > Advanced > Imager Info.
2. Push
/
to highlight Version.
3. Push to view the information screen with model
number, serial numbers, and firmware versions.
4. Push to close the information screen.
To display the electronic certifications:
1. Go to Settings > Advanced > Imager Info.
2. Push
/
to highlight Certificates.
3. Push to view the information screen with the
Imager certifications.
4. Push to close the information screen.
To show the license information:
1. Go to Settings > Advanced > Imager Info.
2. Push
/
to highlight Licenses.
3. Push to view the information screen with a list of
Open Source Software Licenses.
4. Push
/
to scroll to a specific license.
5. Touch the license name on the screen to view the
information screen with the specific license agreement.
6. Push to close the information screen.
Adjust Parallax
With the use of optional add-on lenses, you can fine-tune
the parallax adjustment to precisely align the image.
1. Go to Settings > Advanced > Adjust Parallax.
2. Follow the on-screen prompts to adjust.
Image Enhancement
Image enhancement is available on the TiX560 with the
Image Sharpening and SuperResolution modes.
Image Sharpening uses post-processing of the image to
remove blurring from the image and improve image
quality. This feature is most effective for work in the high
temperature ranges. You can expect several seconds in
delay when using this mode.
SuperResolution uses micro movements to produce an
image that is 640 x 480 pixels using a 320 x 240 sensor.
Results are viewable on the Imager after they are captured
on the TiX560. The TiX520 requires SmartView software
to view a SuperResolution image. Expect a 10-second
delay for the Imager when using this mode.
To set:
1. Go to Settings > Advanced > Enhancement.
2. Push
or
or touch the target to change the
setting.
3. Push or touch Done to select the new setting.
Expert Series Thermal Imager
Menus
37
Advertisement
Table of Contents
