Table of Contents
Advertisement
TiX520, TiX560
Users Manual
®
IR-Fusion
TiX520
Push
to go directly to the adjustment menu for
IR-Fusion. See page 27 for more information about the
IR-Fusion feature.
TiX560
Push
to open the scroll bar that adjusts the
IR-Fusion mode. Use it to infinitely adjust the picture from
Full IR mode to Full Visible mode.
Auto/Manual Level and Span
Push and release
to set the Imager to Auto Range
or Manual Range. The icon in the upper right-hand corner
of the LCD screen identifies the setting as Auto or Manual.
Memory
Push
to go directly to the preview images of stored
files. See page 33 for more information about the Memory
feature.
LED Light
The LED Light illuminates darker work areas. Push to
turn on and turn off the LED light at any time during
operation.
14
Zoom
TiX520
Push
to set the zoom function between no zoom, 2x,
and 4x.
TiX560
Push
to set the zoom function between no zoom, 2x,
4x, and 8x.
Fluke Connect
The Imager supports the Fluke Connect™ Wireless
System (may not be available in all regions). Push
go directly to the wireless setup menu. More information
about Fluke Connect is on page 38.
Rescale
Push and release
and span for objects in the thermal field of view. This
feature operates the Imager in a semi-automatic mode if
manual fine re-adjustment of level and span with the arrow
buttons is not necessary. Rescaling is done as often as
needed.
The Imager always powers up in the same Level
and Span mode, Auto or Manual, as when it was
powered down.
to automatically rescale the level
Note
to
Advertisement
Table of Contents
